Stirrer Accessories
Chemglass Life Sciences Body Only, 45/50 PTFE Bearing, 25.4mm
Body Only, 45/50 PTFE Bearing, 25.4mm. Replacement part for CG2077H series of PTFE stirrer bearings.
Chemglass Life Sciences Stirrer Assembly, Macro, Chem-Stir, 24mm x 110mm Blade Fits 2L-20L Flask, 45/50 Bearing, 10mm OD x 515mm Stirrer Shaft
Stirrer Assembly, Macro, Chem-Stir, 24mm x 110mm Blade Fits 2L-22L Flask, 45/50 Bearing, 10mm OD x 515mm Stirrer Shaft. Assembly consists of a 10mm OD Chem-Stir stirrer shaft, a precision bore-bearing having a standard taper inner joint and a PTFE blade. The blade is sized to fit the listed flask capacities.
Chemglass Life Sciences 10mm Chem-Vac Stirrer Bearing, PTFE, 45/50 Joint Size
10mm Chem-Vac Stirrer Bearing, PTFE, 45/50 Joint Size. Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on larger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve provides a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint allows easy and quick removal. PLEASE NOTE: PTFE STIRRER SHAFTS ARE NOT RECOMMENDED FOR USE WITH THIS BEARING.
Chemglass Life Sciences Stirrer Bearing, PTFE, Complete, fits 10mm Shaft, 24/40 Inner Joint
Stirrer Bearing, PTFE, Complete, fits 10mm Shaft, 24/40 Inner Joint. Grease-Free PTFE stirrer bearing designed for use in moderate vacuum applications. Bearing consists of a threaded glass adapter having the listed inner joint, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing. The saddle o-ring provides only glass and PTFE contact with the reaction, while allowing for the vacuum tight seal. Design of the bearing permits replacement of the saddle o-ring at a fraction of the cost of the entire bearing. PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Chemglass Life Sciences Stirrer Turbine, Upper, PTFE, Pilot Plant, 100mm OD, fits 19mm Shaft, 13/64in Blade Thickness
Stirrer Turbine, Upper, PTFE, Pilot Plant, 100mm OD, fits 19mm Shaft, 13/64in Blade Thickness. PTFE six blade turbine style agitator for use with reactor stirrer shafts. Shaft opening is drilled straight through to permit positioning at any height on the shaft.
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, 480mm OAL
Stirring Shaft, 10mm, Polished, 480mm OAL. A 10mm precision ground and polished stirrer shaft for use with PTFE bearings and CG-2091 and CG-2092 PTFE agitators. Flat ground section extends half way up shaft and permits positive seating of the PTFE locking screws.
Chemglass Life Sciences Stirrer Bearing, Macro, Jacketed, Glass, for 10mm Shaft, 24/40 Inner Joint
Stirrer Bearing, Macro, Jacketed, Glass, for 10mm Shaft, 24/40 Inner Joint. Similar to CG-2070, but water jacketed to control bearing temperature. For use in moderate vacuum with a CG-2074 or CG-2075 ground 10mm stirrer shaft. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.
Chemglass Life Sciences PTFE Insert/Bushing, 25.4mm
PTFE Insert/Bushing, 25.4mm. Replacement part for CG2077H series of PTFE stirrer bearings.
Chemglass Life Sciences Replacement 19mm Stirrer Shaft, Reactor Size: 10L, Fits Support Frame: CG-1965-X-150, Overall Length: 30.6"
Replacement 19mm Stirrer Shaft, Reactor Size: 10L, Fits Support Frame: CG-1965-X-150, Overall Length: 30.6". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ wide flat. REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Ace Glass, Inc. Stir blade, stainless, 24x160mm, 10mm shaft
24X160mm 304 SS stir blades for 10mm O.D. button type stir shafts. For compatible stir shafts see ACE 8068, 8070, 8074, and 8075 series.
Chemglass Life Sciences Stirring Shaft, 19mm, Button Style, for 12000 to 20000mL Flasks, 725mm OAL
Stirring Shaft, 19mm, Button Style, for 12000ml. to 22000ml. Flasks, 725mm OAL. A 19mm OD precision ground stirrer shaft to fit CG-2082 and CG-2083 19mm bearings. Side button for attachment of CG-2089 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2088. ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences Stirrer Blade, PTFE, 10mm, for 5000mL to 12000mL Flasks, 24mm Width x 130mm Length, 29/42 minimum joint clearance
Stirrer Blade, PTFE, 10mm, for 5000mL to 12000mL Flasks, 24mm Width x 130mm Length, 29/42 minimum joint clearance. Stirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 10mm OD.
Chemglass Life Sciences 25.4mm PTFE Stirrer Bearing, 45/50, #129 Body O-Ring, #024 Bushing O-Ring
Grease-Free PTFE stirrer bearing for use under moderate vacuum. The bearing consists of a PTFE standard taper body, PEEK (Polyetheretherketone) compression cap, PTFE Insert/bushing and a Nylon loosening nut. The PTFE insert/bushing provides only glass and PTFE contact with the reaction. Loosening nut above the standard taper inner joint allows easy and quick removal. Supplied complete with a Perfluoro o-ring on the body and a Viton o-ring on the bushing.
Chemglass Life Sciences Stirrer Bearing, Macro, Glass, with tooled Lubricant Cup, for 10mm Shaft, 45/50 Inner Joint
Stirrer Bearing, Macro, Glass, with tooled Lubricant Cup, for 10mm Shaft, 45/50 Inner Joint. Similar to CG-2070 but with a tooled lubricant cup at the top of the bearing to hold an increased amount of lubricant. NOTE: Not for use with CG-2078 or CG-2079 polished stirrer shafts.
Chemglass Life Sciences 10mm OD x 440mm Stirrer Shaft
10mm OD x 440mm Stirrer Shaft. Replacement part for CG206401 Semi-Micro Stirrer Assembly.